Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

NEWS

VOZZ Helmets Receives First Stock Delivery

VOZZ Helmets Receives First Stock Delivery

Tuesday, April 11, 2017

Today (Tuesday, 11th April 2017), VOZZ Helmets received its first delivery of ECE certified RS 1.0 helmets. The arrival of this shipment marks a milestone in the company’s development, and sets the stage for increased distribution in 2017.

Following the official VOZZ Helmets brand press launch on 16th December 2015, the VOZZ RS 1.0 helmet has undergone significant refinement to its design.

Production of the RS 1.0 was paused on 1st May 2016, to allow for a range of product improvements. This included; a new and improved comfort lining, aerodynamic foils added to both locking covers on each side of the helmet, and superior rubber compounds replacing the helmet’s existing rubber compounds – improving seal and minimizing extraneous wind noise.

ECE certified RS 1.0 helmets are now available in Australia in all sizes and colours, from official VOZZ Helmets retailers, and online via the VOZZ Helmets online shop.

VOZZ Helmets offers an innovative rear-access hinged helmet design that clicks together, instead of fastening with a conventional D-ring motorcycle helmet mechanism.

READ MORE
VOZZ Helmets - Swiss Moto 2017

VOZZ Helmets - Swiss Moto 2017

Monday, March 06, 2017

It was an absolute pleasure, attending the four-day Swiss-Moto exhibition (Zürich), in February. We had a chance to show our RS 1.0 helmet to a great number of exhibition attendees. Here's a short wrap-up video from the event!

 

 

READ MORE
Canada MotoGuide Review

Canada MotoGuide Review

Friday, February 24, 2017

http://canadamotoguide.com/2017/02/23/cmgs-favourite-booths-from-the-motorcycle-show/

READ MORE
Safe Helmet Removal in the Case of Emergency

Safe Helmet Removal in the Case of Emergency

Thursday, October 27, 2016

The VOZZ Helmet is a full face, rear access, dual locking motorcycle helmet. IT DOES NOT HAVE A CHIN STRAP. The internal mechanics are known as the Voztec System. This Helmet has an emergency release system and a fully adjustable chip cup. The Safety Release System (S.R.S) has been developed to assist medical staff in the case of an emergency. This allows for a quick and safer removal of the helmet, enabling access to the rider’s head without physically cutting off the helmet.

In the event of an emergency, first responders can gain full access to a downed riders face by opening the front shell.

  • 1.Carefully open the visor
  • 2.Depress both red locking buttons of either side of the helmet.
  • 3.Release the riders chin from the concealed chin cup.
  • 4.Support the rear shell and gently roll the helmet in a backward motion.
  • 5.You now have full access to the downed rider’s head and neck.


Please watch the Emergency Helmet Opening Procedure

The S.R.S is positioned at either end of the hinge pin at the crown of the helmet. By removing these pins, medical personnel are able to separate the front shell from the back with minimal movement to the users’ head.





To remove the front shell from rear shell you will require a flat head screwdriver.

  • 1.Patient positioned on their back, support the helmet.
  • 2.Remove the rubber plugs with the screwdriver to expose the screws.
  • 3.Remove screws on either side in an anti-clockwise direction. This will make the hinge disengage.
  • 4.Release the lower locks the red buttons in an upward direction. If the lock has been damaged, remove the two screws located at either side of the locks.
  • 5.Slowly roll the helmet in a forward and down direction (do not lift) from the hinged area. This frees the jaw from the chin cup before removal.
  • 6.Once the jaw is free, completely remove the front shell. The rear shell will remain to support the head and neck.
  • 7.You will now have full access to the patient.

There is a QR code under the locks of the helmet that can take first responders or emergency personnel through the removal process, with or without a screwdriver.

Please watch the Emergency Helmet Removal





For any questions, please contact VOZZ Helmets +61 2 8068 9642

 

READ MORE
RS1.0 Update

RS1.0 Update

Monday, August 01, 2016

 

The majority of VOZZ wearers love the lid and have been the source of some great feedback on function and performance. Based on this feedback, we responded by instructing the manufacturer to make some changes to the RS1.0. These functional improvements have had a positive impact on performance, however, changes to tooling for the next round of orders has meant our production schedule is now some 4 months behind our plan. Naturally we are not pleased with the delays but there is little we can do to improve the factory’s timelines.

The modifications include; a new improved comfort lining, foils either side on both locking covers, superior rubber compounds, improving seal and extraneous wind noise.  Based on this we have also been able to complete our wind-tunnel testing and our data is currently being complied.

We know you are eagerly waiting for stock to come in, however here at VOZZ we want our customers to get the highest quality product. In the end, we want to be confident you are receiving the best product we can produce.

We have used this “production pause” to continue to refine and finalise who will distribute and stock our helmets internationally. We will be announcing international distributors and dealers in the next 6 weeks on our Website and Facebook page. The RS1.0 will be available from late 2016.

We want to offer you the VOZZ experience so please understand some of our rollout challenges. Rest assured we will keep you advised where and when you can get fitted for a VOZZ Helmet.

If you have an questions please email info@vozzhelmets.com

Thank you,

Your VOZZ team.

 

 

 
READ MORE